當前位置：
上海鼎振儀器設備有限公司 >
產品中心 >
高壓水沖擊試驗箱 > DBL5416高壓蒸汽噴射試驗箱LTA1
DBL5416高壓蒸汽噴射試驗箱LTA1
| 產品型號： |
LTA1 |
|
|
| 所 在 地： |
上海嘉定區 |
| 更新日期： |
2024-12-27 |
| | 型號：LTA1 | | 加工定制：否 | | 外形尺寸：840x800x2000 mm | |
| | 重量：800 ㎏ | | 用途：涂層耐高壓沖洗試驗 | | 外形尺寸：840x800x2000 mm | |
蒸汽噴射試驗箱 LTA1 Steam Jet Testers LTA1
WALTER Cleaningsystems developped an interbranch procedure in
cooperation with Daimler with which the paint adhesion on painted plastic
components can be tested.
The most important factor is to apply the exact volume flow with well-defined
pressures and constant temperature onto the surface.
A further step of development is the compliance with the DIN ISO 16925
standard which guarantees a cross-border standardization of the testing
method.
Due to our worldwide servicing all units are maintained depending on their
state of wear and are brought into a technically perfect condition. The
calibration carried out by a Walter technician and the traceability to general
standards guarantee a worldwide comparability. We thereby also certify
nozzles conforming to standards and train the operators in how to carry out
the tests.
Due to continuous developments we also fulfil the testing specifications of the
following manufacturers
WALTER Cleaningsystems 與戴姆勒公司合作開發了一種測試程序，可以測試
涂漆塑料部件上的油漆附著力。
*重要的因素是將具有明確定義的壓力和恒定溫度的精確體積流量應用于表
面。
進一步的發展是符合 DIN ISO 16925 標準，該標準保證了測試方法的跨境標準
化。
由于我們的全球服務，所有裝置都根據其磨損狀態進行維護，并使其處于技術
上完美的狀態。 由 Walter 技術人員執行的校準以及對一般標準的可追溯性保證
了全球的可比性。 因此，我們還對符合標準的噴嘴進行認證，并培訓操作員如
何進行測試。
Frame:
base frame with 4 guide rollers
Boiler container with heating 1 x 9,0 kW
Spraying booth:
• dimensions wx d x h: 1138 x 730 x 2240 mm
for 1 x test piece approx. 150 x 300 mm
• testing angle 90° - 45° - 30°, +/- 2°
• booth door with inspection glass
• exhaust Ø 102 mm connection piece
• discharge with dirt filter
Possible options:
• horizontal sliding unit
• Volvo – sweeping action
• exhaust fan
• laser pointer
• flow meter
• testing equipment for metering in litres
• nozzle and plug-in nipple according to nonstandard norms
Technical Data: 技術參數
| Flow rate |
15 l/min |
P max.
|
30 – 150 bar adjustable via external pressure
regulating valve (water via by-pass, thus less delivery
volume) |
| Motor |
N 6,5 kW |
| Voltage |
400 V |
| Plug |
CEE 32 amp., 5-pole |
Nozzle distance
|
0 – 450 mm nozzle with adjusting mechanism in
2 directions |
For testing according to the following specifications:
符合標準
• DIN EN ISO 16925:2014-06
• DBL 5416
• Ford BO 160-04
• GM 9531
• Volvo STD 423-0015
• VW PV 1503
• BMW AA-0136
• Renault D 252018
• PSA D 255376
• MAN M 3022
• KIA Hyundai MS210-07
• DAF KEUR00824 -848
• NISSAN M0141
